Georgia Trail Riders Forum
MEMBERS DISCUSSION AREA => General Discussion => Topic started by: The_Dealer on December 09, 2012, 05:03:56 PM
-
Well its a fact that I either have a blown head gasket or.cracked 0331 head. Either way id like to replace the head for future reliability. I plan on using odessa/clearwater new casting head, with the upgrade so it won't crack like stock. I really don't have the tools to do it myself or I would. Just to.make sure I don't get ripped when I shop for a mechanic, how much is a reasonable price for a head swap? I will have the head, gasket set, and new head bolts already purchased. I just need the labor part done.
-
Thats atleast a good solid day or 3 worth of work right there. For some something like that Danny (PHANTOM) or Todd (Tazstoy) would be the guys to ask. {cheers2}
-
Just google it. It is info readily available on the net.
http://www.jeepforum.com/forum/f8/how-many-labor-hours-replace-head-gasket-6-cyl-1146382/
Sent from my Samsung Note 2
-
See if you can find a friend... No seriously. When I had to get the head pulled on my civic I remembered some friends that use to build civics and acuras. I gave him a call and for $500 he pulled it , put new gaskets/seals, new head, installed various other parts I had bought and really cleaned the civic up. The dealer wanted a minimum of $1000 just to pull the head and send off to a machine shop.
Sent from my iPhone using Tapatalk
-
See if you can find a friend... No seriously. When I had to get the head pulled on my civic I remembered some friends that use to build civics and acuras. I gave him a call and for $500 he pulled it , put new gaskets/seals, new head, installed various other parts I had bought and really cleaned the civic up. The dealer wanted a minimum of $1000 just to pull the head and send off to a machine shop.
Sent from my iPhone using Tapatalk
Did you pay them in beer & food? I find this form of payment makes things happen!
If it were me, I'd just do it myself. Getting the tools you need is going to be a lot cheaper than paying a shop. Just read a lot about it, take your time & keep your work area clean. Label all parts you take off. I've had a very tight budget the past couple years & have had no choice but to learn how to do things I never thought I'd be able to. From my expirence, things aren't nearly as bad as you think they're going to be.
-
The only thing I don't have is a torque wrench, and a clean working area. I just don't have the time I used to