5 Dana 60 rears ff 4.11 gears 30 spline $250

[Jimmy]

Stephen, PM me your phone number. I am supposed to be dropping my axles off in Columbia tomorrow. If it works out, I want to come pick a 60 up on the way home. Any of them happen to have both axles spin the same way when you turn the pinion yoke?

[StevenH]

Ok I'll send you my number. it has to be late in the afternoon though. 3pm ish at the earliest

Nope they are open diffs

[mdo817]

Stephen, PM me your phone number. I am supposed to be dropping my axles off in Columbia tomorrow. If it works out, I want to come pick a 60 up on the way home. Any of them happen to have both axles spin the same way when you turn the pinion yoke?

You got a welder, spools are cheap option also.

[Jimmy]

^ I think I am going to go option A for now. Then if I ever regear, go to a spool.

[StevenH]

A welded diff is stronger than a locker or spool. check out how many times you have seen/heard of lockers breaking and how many welded stock carriers break

detroit=junk on the rocks. they were built for street cars where the tires do not leave the ground and the car is pointed in a straight line at the dragstrip

Jimmy is going to have himself a Dana 60 rear tomorrow {cool} what front are you going with? may as well get a 60

When you call me tomorrow remind me if you want the shock tabs or not

[Jimmy]

I might as well go ahead and get the shock tabs too. I was planning on an 8-lug HP44 unless I find a 60 for a steal.

[mdo817]

A welded diff is stronger than a locker or spool. check out how many times you have seen/heard of lockers breaking and how many welded stock carriers break

detroit=junk on the rocks. they were built for street cars where the tires do not leave the ground and the car is pointed in a straight line at the dragstrip

Jimmy is going to have himself a Dana 60 rear tomorrow {cool} what front are you going with? may as well get a 60

When you call me tomorrow remind me if you want the shock tabs or not

Jimmy shoot me some pictures of Steven's front, he won't take any and show it off, I'm sure he did a good job.

[Jimmy]

They'll be cell phone shots but I'll try, haha.

[mdo817]

They'll be cell phone shots but I'll try, haha.

Cell pictures are better than no pictures.

[StevenH]

The front isnt finished it's just mocked up under it because hasnt sent me my shackle hangers. I'll be taking pictures because the high steer arms are bling and the steering heims are 3/4" chromoly  ;D the tierod isnt on it but it will run over the springs behind the axle. not to mention the 3/8" steel diff cover

I had to build it strong because I cant drive 

[Logan]

                 
 truer words have not been spoken. ;D

[StevenH]

You dont need to rub it in  ;D

Jimmy I didnt even think to mention it but I want to swap my front 60 out for a passengers side drop. Give me what I have in it and it's yours, ask Larry what I have in it and you'll probably want it 

I got the drivers side axle at first because it was going to be easier so I could get it rolling the fastest without swapping transfer cases but I have all the time in the world now to do it right