BECOME A CORE MEMBER HERE

Author Topic: Chrysler Mechanics  (Read 894 times)

Offline hb_hound

  • Visitor
  • Posts: 372
  • KARMA : +6/-1
Chrysler Mechanics
« on: January 16, 2013, 09:45:40 AM »
Need some help
Wife's '07 Aspen failed emissions
Codes
P0455 – Evap Emission Control, Sys Leak
P0456 – Mfg Specific
P0406 – Exhaust Gas Recirculation Sensor
Gas cap – Passed

Are these dealer only repairs, as I was told, or can I make the repairs at home?

BigJerm

  • Guest
Re: Chrysler Mechanics
« Reply #1 on: January 16, 2013, 09:53:16 AM »
No clue on 456 but 455 could be something obvious like a bad hose or connection. I got a similar code on my old civic and after re-clamping all hoses on the canister and engine, unplugging and cleaning the sensor plug and putting it back on, buying a new gas cap because the old 1 was shot, the light never came back. But it could be a pin hole leak somewhere and you would need to do some kind of smoke/die test. 406, if you can find what sensor and where then you could clean, inspect, and replace if needed.

Offline DOUG

  • Visitor
  • Posts: 21029
  • KARMA : +112/-657
Re: Chrysler Mechanics
« Reply #2 on: January 16, 2013, 10:20:27 AM »
Manny, do you know R.L.?  I'm sure he could help.

JROLIN

  • Guest
Re: Chrysler Mechanics
« Reply #3 on: January 16, 2013, 11:26:38 AM »
Need some help
Wife's '07 Aspen failed emissions
Codes
P0455 – Evap Emission Control, Sys Leak
P0456 – Mfg Specific
P0406 – Exhaust Gas Recirculation Sensor
Gas cap – Passed

Are these dealer only repairs, as I was told, or can I make the repairs at home?


Is it 2wd or 4wd?
4.7 or 5.7?

Po455 and Po456 are evap leaks. We have a smoke machine here and can test to find out where its coming from.

Po4o6 is a common issue with dodges. Are you getting a knocking or pinging from the motor ? P0401 to P0406 is EGR related. It does not necessarily mean the sensor is bad, it could be a bad valve. Something I would have to look at to get a better answer on.

Let me know Manny.

Offline hb_hound

  • Visitor
  • Posts: 372
  • KARMA : +6/-1
Re: Chrysler Mechanics
« Reply #4 on: January 16, 2013, 11:51:39 AM »
2WD, 5.7, I'll bring it by Monday.

Offline 91jeepyj-4BANGER

  • Visitor
  • Posts: 1
  • KARMA : +0/-0
Re: Chrysler Mechanics
« Reply #5 on: January 31, 2013, 07:17:30 PM »
i got a problem with my low 4 gear in my transfer case. when ever i put it it in low 4x4 and try to go it "pops" out of gear in the transfer case back into nuetral. its a 1991 jeep wrangler yj 2.5L

BigJerm

  • Guest
Re: Chrysler Mechanics
« Reply #6 on: January 31, 2013, 07:30:23 PM »
Have you gotten up under your jeep and put in 4LO by hand?


Sent from my iPhone using Tapatalk

Offline Matt

  • Visitor
  • Posts: 8563
  • KARMA : +18/-38
  • ...
    • Georgia Trail Riders
Re: Chrysler Mechanics
« Reply #7 on: February 01, 2013, 08:22:30 AM »
i got a problem with my low 4 gear in my transfer case. when ever i put it it in low 4x4 and try to go it "pops" out of gear in the transfer case back into nuetral. its a 1991 jeep wrangler yj 2.5L

Sounds like the linkage is binding. Do you have a body lift? Big dent in the belly pan?
Matt, Jessica, Aleigha (4), Gavin (1)

1999 Wrangler TJ
*With modifications

My '99 TJ Build

matt@gatrailriders.com

 



BECOME A CORE MEMBER HERE

CHECK OUT OUR CLUB WEBSITE

JOIN US ON FACEBOOK

JOIN US ON INSTAGRAM