Built dana 50

[Mortalis5509]

I am selling a dana 50 out of a sd truck.
5.13's
Lockright locker
Artec truss
Coilover tabs welded in
Link brackets welded in
Warn locking hubs
Has tie rod
Good brakes
$700 obo

Sent from my SCH-I535 using Tapatalk 4 Beta

[Mortalis5509]

[DOUG]

Difference to a 60 the ring gear or shafts or ?

Sent off camber

[Mortalis5509]

Difference to a 60 the ring gear or shafts or ?

Sent off camber

Ring gear. Shafts are 30/30. I had this uxle under a tj with a 4.0 and 39" reds. Going to a v8 and atlas 4 speed with the stickies wouldn't work. I wanted something I could hold the peddle to floor with stickies and it live.

I went with an 05 sd axle. Spool and rcv's.

It can take abuse but not the trail riding and racing I'm looking for.

Sent from my SCH-I535 using Tapatalk 4 Beta

[Skandalous]

hmmm I may be interested for future use when I do my axle swap and stretch. 

[kvom]

As I understand it, the main disadvantage of the 50 vs. the 60 is the availability of aftermarket parts.

[Mortalis5509]

As I understand it, the main disadvantage of the 50 vs. the 60 is the availability of aftermarket parts.

Not really. You can get cut shafts by a few companies, that are of high quality. Gears are not an issue. The greatest limiting factor is locker option, but there is already one in there.

[tcdawg]

Hudlow Gear, the shop that straightened my axle, can make or modify any type of shaft and spline count you need.

[Mortalis5509]

Up

Sent from my SCH-I535 using Tapatalk 4

[Mortalis5509]

$550.