(4) Teraflex HD 7/8" tie rod ends 18TPI

[Chris Hyde]

(4) Teraflex HD 7/8" tie rod ends with 18TPI thread pitch.  Came off a Teraflex high steer kit when I did the tTeraflex tie rod flip.  Te new kit replaced these tie rod ends with lower profile ends to move the tie rod on top of the knuckle.  With a couple pieces of DOM, these are perfect for making your own extrememly heavy duty draglink and tie rod.  These tie rods sell from Teraflex for $220 new.  I will take $100 for all (4) and that is a STEAL.  Here is what you get.

    * (1) 7/8" 18TPI w/ jam nut - Left hand thread, offset (for drivers side of tie rod)
    * (1) 7/8" 18TPI w/ jam nut - Right hand thread, offset (for passengers side of tie rod)
    * (1) 7/8" 18TPI w/ jam nut - Left hand thread, standard (draglink end at pitman arm)
    * (1) 7/8" 18TPI w/ jam nut - Left hand thread, standard (draglink end at axle)

Standard TRE for draglink ends:



Offset TRE for tie rod ends: