(4) Teraflex HD 7/8" tie rod ends with 18TPI thread pitch. Came off a Teraflex high steer kit when I did the tTeraflex tie rod flip. Te new kit replaced these tie rod ends with lower profile ends to move the tie rod on top of the knuckle. With a couple pieces of DOM, these are perfect for making your own extrememly heavy duty draglink and tie rod. These tie rods sell from Teraflex for $220 new. I will take $100 for all (4) and that is a STEAL. Here is what you get.
* (1) 7/8" 18TPI w/ jam nut - Left hand thread, offset (for drivers side of tie rod)
* (1) 7/8" 18TPI w/ jam nut - Right hand thread, offset (for passengers side of tie rod)
* (1) 7/8" 18TPI w/ jam nut - Left hand thread, standard (draglink end at pitman arm)
* (1) 7/8" 18TPI w/ jam nut - Left hand thread, standard (draglink end at axle)
Standard TRE for draglink ends:
Offset TRE for tie rod ends: