Craigslist/Good Deal Thread

[Mortalis5509]

Junk yard 60, you talking?

No.  Not talking JY axles or Dynatrac

Dana UD 60 axles...from Dana

I just saw the front is $7600 but that doesn't have rcv or arb. Add those two in at about $1500 more and your at that price. Or am I missing something.

Sent from my SM-G935V using Tapatalk

[bjeep]

Junk yard 60, you talking?

No.  Not talking JY axles or Dynatrac

Dana UD 60 axles...from Dana

Is the UD60 ball joint or kingpin ? Any high steer options?
Just put a Steering 14bolt together for about the same price as that UD60. Spidertrax pro Knuckles unit bearings, spool, and 300m Spidertrax shafts all 40 spline.

[Anvilsam]

i see what you are saying but alot of us don't need the strength of what you are proposing putting together. Doubtful i will ever break a ujoint with my new axles and v6.

[tcdawg]

Is the UD60 ball joint or kingpin ? Any high steer options?
Just put a Steering 14bolt together for about the same price as that UD60. Spidertrax pro Knuckles unit bearings, spool, and 300m Spidertrax shafts all 40 spline.

Balljoint

[bjeep]

Is the UD60 ball joint or kingpin ? Any high steer options?
Just put a Steering 14bolt together for about the same price as that UD60. Spidertrax pro Knuckles unit bearings, spool, and 300m Spidertrax shafts all 40 spline.

Balljoint

How well do they hold up? Are they the newer bigger joints like the 06 and up stuff?
I get about three rides on the jeep and the balljoints are loose.

[Mortalis5509]

Is the UD60 ball joint or kingpin ? Any high steer options?
Just put a Steering 14bolt together for about the same price as that UD60. Spidertrax pro Knuckles unit bearings, spool, and 300m Spidertrax shafts all 40 spline.

Balljoint

How well do they hold up? Are they the newer bigger joints like the 06 and up stuff?
I get about three rides on the jeep and the balljoints are loose.

Have you done the mod where you put the lower joint into the top assuming the upper is loose.

Sent from my SM-G935V using Tapatalk

[bjeep]

Is the UD60 ball joint or kingpin ? Any high steer options?
Just put a Steering 14bolt together for about the same price as that UD60. Spidertrax pro Knuckles unit bearings, spool, and 300m Spidertrax shafts all 40 spline.

Balljoint

How well do they hold up? Are they the newer bigger joints like the 06 and up stuff?
I get about three rides on the jeep and the balljoints are loose.

Have you done the mod where you put the lower joint into the top assuming the upper is loose.

Sent from my SM-G935V using Tapatalk

Nope. Both get loose so not spending anymore money or time on it.Time for a update anyway. Last trip out broke a rear shaft that took out the spindle on the sterling so might as well upgrade that as well.

[Cleveland99]

 http://rubicon.pridemore.org/  Found this trolling around


Sent from my iPad using Tapatalk

[Big Dave]

Its on CL. If he cleaned it up he could probably get $20k.

[lt99ls1]

 //popcorn//

[BigMike]

//popcorn//

This is the Good Deal thread  //cheers2//

[lt99ls1]

//popcorn//

This is the Good Deal thread  //cheers2//

48k and looks like it is still on coils and shocks....


Sent from my Pixel XL using Tapatalk