Craigslist/Good Deal Thread

[lt99ls1]

http://www.hardlinecrawlers.com/forums/index.php?topic=56394.0

[BigMike]

some one needs to snag these!!! https://atlanta.craigslist.org/nat/pts/6192552579.html JK owners!!!

I contacted the seller.  I'm going to buy them if they are available.  Thanks Connor.

[BigMike]

Hard to beat $478

It looks like a good deal but in reality, it doesn't hold much.  Needs more smaller/thinner drawers to hold more tools.  The deep drawers will cause you to have to dig for tools.  It would be good as a secondary box for BIG tools. 

[clark123456]

Hard to beat $478

It looks like a good deal but in reality, it doesn't hold much.  Needs more smaller/thinner drawers to hold more tools.  The deep drawers will cause you to have to dig for tools.  It would be good as a secondary box for BIG tools.

Mine is similar and works well for me; however, I don't use the top section as that part is always closed and crap is stacked on top. 

Maybe you only have small tools for your factory JK and pretty bike???

Sent from my SM-G930V using Tapatalk

[patman]

Hard to beat $478

It looks like a good deal but in reality, it doesn't hold much.  Needs more smaller/thinner drawers to hold more tools.  The deep drawers will cause you to have to dig for tools.  It would be good as a secondary box for BIG tools.

Mine is similar and works well for me; however, I don't use the top section as that part is always closed and crap is stacked on top. 

Maybe you only have small tools for your factory JK and pretty bike???

Sent from my SM-G930V using Tapatalk

Doesn't take that many tools to adjust a light bar

[Anvilsam]

Hard to beat $478

It looks like a good deal but in reality, it doesn't hold much.  Needs more smaller/thinner drawers to hold more tools.  The deep drawers will cause you to have to dig for tools.  It would be good as a secondary box for BIG tools.

Mine is similar and works well for me; however, I don't use the top section as that part is always closed and crap is stacked on top. 

Maybe you only have small tools for your factory JK and pretty bike???

Sent from my SM-G930V using Tapatalk

for his stock jk he only needs an 18mm, 21mm sockets and a bunch of zip ties.

[kent10sne1]

Hard to beat $478

It looks like a good deal but in reality, it doesn't hold much.  Needs more smaller/thinner drawers to hold more tools.  The deep drawers will cause you to have to dig for tools.  It would be good as a secondary box for BIG tools.

Mine is similar and works well for me; however, I don't use the top section as that part is always closed and crap is stacked on top. 

Maybe you only have small tools for your factory JK and pretty bike???

Sent from my SM-G930V using Tapatalk

Doesn't take that many tools to adjust a light bar

Nice!  Pat has the lead atm. 

[BigMike]

Hard to beat $478

It looks like a good deal but in reality, it doesn't hold much.  Needs more smaller/thinner drawers to hold more tools.  The deep drawers will cause you to have to dig for tools.  It would be good as a secondary box for BIG tools.

Mine is similar and works well for me; however, I don't use the top section as that part is always closed and crap is stacked on top. 

Maybe you only have small tools for your factory JK and pretty bike???

Sent from my SM-G930V using Tapatalk

I only have a hammer, crescent wrench, screw driver, duct tape, and WD40.  You are probably overcompensating with tools for skills. 

[patman]

Hard to beat $478

It looks like a good deal but in reality, it doesn't hold much.  Needs more smaller/thinner drawers to hold more tools.  The deep drawers will cause you to have to dig for tools.  It would be good as a secondary box for BIG tools.

Mine is similar and works well for me; however, I don't use the top section as that part is always closed and crap is stacked on top. 

Maybe you only have small tools for your factory JK and pretty bike???

Sent from my SM-G930V using Tapatalk

I only have a hammer, crescent wrench, screw driver, duct tape, and WD40.  You are probably overcompensating with tools for skills. 

Ah, the JK Fixit-Kit. Very popular setup

[DOUG]

A 41" wide case with 3 flat drawers is a ton of small space. I see this box set as prefecto for the price. Or you can buy the big Snap On.

[Jango]

Snap on //drool//

but this is the truth

[patman]

I don't understand the cost of snap-on tool boxes. What makes them worth $4k? (Based on a Craigslist post I saw one time)