BECOME A CORE MEMBER HERE

Author Topic: Dana 44 front & 9 Inch rear  (Read 118 times)

Offline biscuit88

  • C.O.R.E MEMBER
  • *
  • Posts: 27
Dana 44 front & 9 Inch rear
« on: May 02, 2018, 10:14:10 AM »
Front Dana 44 from a 1977 Early Bronco.  WHEELS AND TIRES HAVE ALREADY BEEN SOLD!!!!
3.55 Richmond gears, hardened Yukon axles, Eaton Electric locker, heavy duty diff cover, Warn hubs, flat top knuckles with one high steer arm for cross over steering, Chevy brake caliper setup, heavy duty drag link, heavy duty tie rod with hiems, panhard bar with hiems, and tabs for hydraulic ram assist.

Rear Ford 9 Inch from a 1977 early Bronco.
3.55 Richmond gears, Strange nodular 3rd member, Strange full spool, and 35 spline hardened Yukon axles.

Both axles have the spring perches welded at the width for a CJ7 frame.  The only upgrade that I haven't done is rear disk brakes only because the drums worked and I never wore them out.

Price $2000 nego.
Axles located in Powder Springs, Ga.
cell number 678-618-4663 text is the best way to reach me.

Offline biscuit88

  • C.O.R.E MEMBER
  • *
  • Posts: 27
Re: Dana 44 front & 9 Inch rear
« Reply #1 on: May 08, 2018, 03:43:06 PM »
Bump for a great deal.

 

CLUB WEBSITE