Thanks guys!
My biggest concern is getting under the jeep, or better yet getting it off the ground. I dont have a floor jack, but i am working on borrowing one. now i am wondering if i should do a set of control arms at the same time just to be safe.
I have read a lot in the last couple of days about people's opinions on that subject with a 2.5" lift.
Sounds to me like it would be best to do it at the same time as the left install since installing them will be about the same work as install on the lift. No reason to do the same work twice.
Thanks again for all of the help.
Trying to get it ready for Alabama in a few weeks.
Torque on control arm bolts is important, and some of the numbers are high. Need a good long arm torque wrench.
Suspension Arm Lower Axle Bracket Nut 125 ft-lbs
Suspension Arm Lower Frame Bracket Nut 125 ft-lbs
Suspension Arm Upper Axle Bracket Nut/Bolt 75 ft-lbs
Suspension Arm Upper Frame Bracket Bolt 75 ft-lbs
Track Bar Frame Bracket Nut 125 ft-lbs
Track Bar Axle Bracket Bolt 125 ft-lbs