Author Topic: Alabama gears (Read 619 times)

Cannonballkev · « **on:** February 10, 2024, 04:51:42 PM »

Alabama gears, no teeth!

My buddy, Roger’s axle he bought “ good to go”

Doing a gear change now

patman · « **Reply #1 on:** February 10, 2024, 05:05:47 PM »

Good to go straight to the recycler

Big Dave · « **Reply #2 on:** February 10, 2024, 07:02:54 PM »

That is terrible

TravisMac · « **Reply #3 on:** February 10, 2024, 07:54:44 PM »

I saw a cool fire pit made of old ring and pinions. That’s about all those are good for anymore!

Cannonballkev · « **Reply #4 on:** February 10, 2024, 09:55:10 PM »

Like when you are on a trail with big rocks, pictures don’t do justice of what it actually looks like.

extremetownie · « **Reply #5 on:** February 11, 2024, 08:33:48 AM »

You see how the inside of the teeth are all chewed up. Something else is wrong. Bearing went out, or bad set up.

Cannonballkev · « **Reply #6 on:** February 11, 2024, 12:12:40 PM »

You see how the inside of the teeth are all chewed up. Something else is wrong. Bearing went out, or bad set up.

Bearings looked ok (we have new ones) I think it was bad set up. Carrier cap bolts were just past finger tight