BECOME A CORE MEMBER HERE
« previous next »
Pages: [1] 2   Go Down

Author Topic: 9in with 4.88 gears, 31 spline, have disc brakes to bolt on it, and full spooled  (Read 3427 times)

Offline Huntingman2706217

  • Visitor
  • Posts: 439
  • KARMA : +0/-0
  • Project Frugal II
    • My build
9in with 4.88 gears, 31 spline, have disc brakes to bolt on it, and full spooled
« on: March 05, 2011, 04:50:09 PM »
seeing if anyones interested... im thinking about finding a 8 lug axle instead to match my front 8x170... axle was built for a CJ and should be a bolt in for them... i bought it for my XJ... came out of a mid 80's pickup and is not the N case... ive never ran it but was told it was freshly rebuilt with everything and then he went to rock wells... maybe a slight seepage from the pinion but nothing i would worry about... also have a set of the rare Lincoln mark VII or whatever disc brakes that were only on a few models... there suppose to be a bolt in... just need rotors... drums are still on it and axles still together...

$400

i also have a full ruffstuff simple axle swap i would sell with the axle for 2.5in springs if someone want to stick it in something else...

$100
678-588-6661
Logged
95 2 door I6, 2006 F250 axles... 5.38's and welded F&R... custom Y linked front... leafs (for now) in the rear... H1 double beadlocks and rock rings with 40's

Build Page:
www.cherokeeforum.com/f46/frugal-ii-poor-mans-story-73061/

mdo817

  • Guest
Re: 9in with 4.88 gears, 31 spline, have disc brakes to bolt on it, and full spooled
« Reply #1 on: March 05, 2011, 06:41:12 PM »
It's probably from a Lincoln Versailles, that was a rear disk brake Lincoln that a lot of folks use.
Logged

Offline Huntingman2706217

  • Visitor
  • Posts: 439
  • KARMA : +0/-0
  • Project Frugal II
    • My build
Re: 9in with 4.88 gears, 31 spline, have disc brakes to bolt on it, and full spooled
« Reply #2 on: March 05, 2011, 08:08:38 PM »
Correct... I was thinking it was the versallies mach VII like they were both the same vehicle but was a model of one or whatever... or class? Which ever... y'all catch my drift lol..
Logged
95 2 door I6, 2006 F250 axles... 5.38's and welded F&R... custom Y linked front... leafs (for now) in the rear... H1 double beadlocks and rock rings with 40's

Build Page:
www.cherokeeforum.com/f46/frugal-ii-poor-mans-story-73061/

Offline hb_hound

  • Visitor
  • Posts: 372
  • KARMA : +6/-1
Re: 9in with 4.88 gears, 31 spline, have disc brakes to bolt on it, and full spooled
« Reply #3 on: March 06, 2011, 02:55:41 PM »
Interested in selling just the brakes?
Logged

Offline Huntingman2706217

  • Visitor
  • Posts: 439
  • KARMA : +0/-0
  • Project Frugal II
    • My build
Re: 9in with 4.88 gears, 31 spline, have disc brakes to bolt on it, and full spooled
« Reply #4 on: March 06, 2011, 08:38:51 PM »
only if i sell the axle without them... lol... sorry... if i cant sell it before to long then ill just use it... ill just have my H1 wheels built different front and back... only need a spare tire anyways... not a spare wheel with these style...
Logged
95 2 door I6, 2006 F250 axles... 5.38's and welded F&R... custom Y linked front... leafs (for now) in the rear... H1 double beadlocks and rock rings with 40's

Build Page:
www.cherokeeforum.com/f46/frugal-ii-poor-mans-story-73061/

MMjeep

  • Guest
Re: 9in with 4.88 gears, 31 spline, have disc brakes to bolt on it, and full spooled
« Reply #5 on: March 09, 2011, 07:35:07 PM »
what is the WMS on the axle?
Logged

Offline Huntingman2706217

  • Visitor
  • Posts: 439
  • KARMA : +0/-0
  • Project Frugal II
    • My build
Re: 9in with 4.88 gears, 31 spline, have disc brakes to bolt on it, and full spooled
« Reply #6 on: March 09, 2011, 08:32:29 PM »
65 i think... its the truck 9in... not the car 9in...
Logged
95 2 door I6, 2006 F250 axles... 5.38's and welded F&R... custom Y linked front... leafs (for now) in the rear... H1 double beadlocks and rock rings with 40's

Build Page:
www.cherokeeforum.com/f46/frugal-ii-poor-mans-story-73061/

MMjeep

  • Guest
Re: 9in with 4.88 gears, 31 spline, have disc brakes to bolt on it, and full spooled
« Reply #7 on: March 12, 2011, 10:40:02 PM »
do you got any pics of it? so the bolt pattern should be 5X5.5 right?
Logged

Offline Huntingman2706217

  • Visitor
  • Posts: 439
  • KARMA : +0/-0
  • Project Frugal II
    • My build
Re: 9in with 4.88 gears, 31 spline, have disc brakes to bolt on it, and full spooled
« Reply #8 on: March 13, 2011, 09:27:31 PM »
pretty sure the fords were 5x5 man... been awhile since i looked it up lol... never really mattered to me lol... and i can take a pic for ya... its not painted and pretty... so could pretty much google image a 9in and itll look the same... lol...
Logged
95 2 door I6, 2006 F250 axles... 5.38's and welded F&R... custom Y linked front... leafs (for now) in the rear... H1 double beadlocks and rock rings with 40's

Build Page:
www.cherokeeforum.com/f46/frugal-ii-poor-mans-story-73061/

ranger11

  • Guest
Re: 9in with 4.88 gears, 31 spline, have disc brakes to bolt on it, and full spooled
« Reply #9 on: March 13, 2011, 10:51:07 PM »
Fords are 5x5.5 or 5x4.5 but more than likely 5x5.5 for the 9"
Logged

Offline Huntingman2706217

  • Visitor
  • Posts: 439
  • KARMA : +0/-0
  • Project Frugal II
    • My build
Re: 9in with 4.88 gears, 31 spline, have disc brakes to bolt on it, and full spooled
« Reply #10 on: March 16, 2011, 08:15:32 PM »
Sold
Logged
95 2 door I6, 2006 F250 axles... 5.38's and welded F&R... custom Y linked front... leafs (for now) in the rear... H1 double beadlocks and rock rings with 40's

Build Page:
www.cherokeeforum.com/f46/frugal-ii-poor-mans-story-73061/

MMjeep

  • Guest
Re: 9in with 4.88 gears, 31 spline, have disc brakes to bolt on it, and full spooled
« Reply #11 on: March 22, 2011, 08:05:37 PM »
dang shouldve jumped on this while i had the chance
Logged
Pages: [1] 2   Go Up
« previous next »
 



BECOME A CORE MEMBER HERE

CHECK OUT OUR CLUB WEBSITE

JOIN US ON FACEBOOK

JOIN US ON INSTAGRAM