Quote from: ACGiddens on September 27, 2012, 09:33:43 PMFrom Artec's site:http://www.artecindustries.com/Dana-44-Axle-Truss-CenteredFull-Width_p_305.html"The Jeep TJ Rubicon Rear Dana 44 has a centered differential housing that measures approx. 15" and the axle tube diameter is 2.625 inches. Other Dana 44's will measure differently and have differing axle tube diameters. Please ensure your axle meets these dimensions prior to ordering. Can be easily modified to fit larger tube diameters. Regardless, the axle should have NO STOCK BRACKETRY for this truss to work."http://www.artecindustries.com/Dana-44-Wagoneer-MODULAR-Rear-Truss_p_227.html"The Jeep Wagoneer Rear Dana 44 has about 18 inches of axle tube on the driver side and about 20 inches of passenger side axle tube. The axle tube diameter is 2.75 inches. Other Dana 44's will measure differently and have differing axle tube diameters. Please ensure your axle meets these dimensions prior to ordering."All well n good and what not but they are wrong about the tj Rubi axle. I have an 04 rubicon and the shafts are not the same length. I promise. I'm not trying to argue with you and I know you copied and paste that but I have changed and pulled them multiple times.
From Artec's site:http://www.artecindustries.com/Dana-44-Axle-Truss-CenteredFull-Width_p_305.html"The Jeep TJ Rubicon Rear Dana 44 has a centered differential housing that measures approx. 15" and the axle tube diameter is 2.625 inches. Other Dana 44's will measure differently and have differing axle tube diameters. Please ensure your axle meets these dimensions prior to ordering. Can be easily modified to fit larger tube diameters. Regardless, the axle should have NO STOCK BRACKETRY for this truss to work."http://www.artecindustries.com/Dana-44-Wagoneer-MODULAR-Rear-Truss_p_227.html"The Jeep Wagoneer Rear Dana 44 has about 18 inches of axle tube on the driver side and about 20 inches of passenger side axle tube. The axle tube diameter is 2.75 inches. Other Dana 44's will measure differently and have differing axle tube diameters. Please ensure your axle meets these dimensions prior to ordering."
Quote from: Mortalis5509 on September 27, 2012, 10:17:44 PMQuote from: ACGiddens on September 27, 2012, 09:33:43 PMFrom Artec's site:http://www.artecindustries.com/Dana-44-Axle-Truss-CenteredFull-Width_p_305.html"The Jeep TJ Rubicon Rear Dana 44 has a centered differential housing that measures approx. 15" and the axle tube diameter is 2.625 inches. Other Dana 44's will measure differently and have differing axle tube diameters. Please ensure your axle meets these dimensions prior to ordering. Can be easily modified to fit larger tube diameters. Regardless, the axle should have NO STOCK BRACKETRY for this truss to work."http://www.artecindustries.com/Dana-44-Wagoneer-MODULAR-Rear-Truss_p_227.html"The Jeep Wagoneer Rear Dana 44 has about 18 inches of axle tube on the driver side and about 20 inches of passenger side axle tube. The axle tube diameter is 2.75 inches. Other Dana 44's will measure differently and have differing axle tube diameters. Please ensure your axle meets these dimensions prior to ordering."All well n good and what not but they are wrong about the tj Rubi axle. I have an 04 rubicon and the shafts are not the same length. I promise. I'm not trying to argue with you and I know you copied and paste that but I have changed and pulled them multiple times. I dont have a TJ Rubicon so I could be wrong but I don't think it has anything to do with axle shaft length. The shaft length is going to be different from p/s to d/s because of the internals of the pumpkin; carrier, differential and such.Measure your axle tube length and let us know. Curious {popcorn}